011 805 5030 / 084 3797 031 | Contact us | FAQ

Anritsu MG3740A Analog Signal Generator

: Anritsu MG3740A Analog Signal Generator

Anritsu MG3740A Analog Signal Generator

Product Description

The MG3740A Analog Signal Generator has excellent RF specifications, including SSB Phase Noise, output level, etc., and versatile modulation functions (AM/FM/ΦM/Pulse). The MG3740A is the ideal solution for high-purity signal source for testing analog radio Rx characteristics. Moreover, adding the digital modulation option supports generation of narrowband digital modulation signals.
Supports Narrowband Digital as well as CW and Analog Modulations !

■ Main Performance and Specifications

Basic Performance

Frequency Range: 100 kHz to 2.7/4/6 GHz [1stRF Opt-032/034/036]
100 kHz to 2.7/4/6 GHz [2ndRF Opt-062/064/066]
SSB Phase Noise: <-140 dBc/Hz nominal (100 MHz, 20 kHz offset, CW)
<-131 dBc/Hz typ. (1 GHz, 20 kHz offset)
Level setting range: -110 to +17 dBm [Standard]
-144 to +17 dBm [Opt-042/072]
High Power Output: +23 dBm (CW, 400 MHz to 3 GHz) [Opt-041/071]
Switching Speed: <600 µs (frequency/amplitude, List/Sweep mode)
Built-in AM/FM/ΦM/Pulse Modulation Function [Standard]

Expansion Options

Adding additional analog modulation input [Opt-050/080]
Adding additional analog modulation input options extends to two internal modulation sources (AM/FM/ΦM) and
one external modulation source supporting simultaneous two-signal modulation.
Two independent RF outputs using Dual-RF [Option]
Supports "Wanted + Interference wave for Rx characteristics tests", "Amp intermodulation characteristics evaluation",
and "RF/LO signal source for Mixer evaluations".
USB Power Sensor (sold separately)
Supports connection of two USB power sensors max.
Expansion to Narrowband Digital Modulation Signal Generator [Opt-020]
Adding the digital modulation function [Opt-020] supports generation of narrowband digital modulation signals.BER Measurement Function [Opt-021]
- RF Modulation Bandwidth : 2 MHz
- Waveform generation software: IQproducer (License sold separately)
  TDMA IQproducer / Fading IQproducer
Input bit rate: 100 bps to 40 Mbps

Communications Interfaces

Standard 1000Base-T, GPIB, and USB interfaces
Built-in SCPI, MG3700A/MS269xA/MS2830A/MG364xA compatibility modes

* IQproducer™ is a registered trademark of Anritsu Corporation.
* Other company, product, service names, etc., are brands, registered trademarks, etc., of their respective owners.

Features

Analog Signal Generator supporting frequencies of 100 kHz to 2.7/4/6 GHz
High-Purity Signal Source for Testing Analog Radio
Built-in AM/FM/ΦM/Pulse Modulation Function [Standard]
Two RF outputs using Dual-RF [Option]
Expansion to Narrowband Digital Modulation Signal Generator [Option]

Specifications

Items		Specifications
Frequency	Setting range	9 kHz to 2.7 GHz [Opt-032/062] 9 kHz to 4 GHz [Opt-034/064] 9 kHz to 6 GHz [Opt-036/066]
Frequency	Resolution	0.01 Hz
Output level	Setting range	Without reverse power protection -110 to +17 dBm (standard) -110 to +30 dBm (with high power extension option) -144 to +17 dBm (with low power extension option) -144 to +30 dBm (with high power extension and low power extension option)
Output level	Accuracy	CW, 18 to 28°C, -100 to +5 dBm, without reverse power protection ±0.5 dB typ. (100 kHz ≤ f <50 MHz) ±0.5 dB (50 MHz ≤ f ≤3 GHz) ±0.7 dB (3 GHz < f ≤4 GHz) ±0.8 dB (4 GHz < f ≤6 GHz)
Signal purity	Spurious/Harmonics	<-30 dBc
	Spurious/ Non harmonics	-30 dBm ≤ Output level ≤+5 dBm, CW, ≥10 kHz offset <-62 dBc, -70 dBc typ. (100 kHz ≤ f ≤187.5 MHz) <-68 dBc, -76 dBc typ. (187.5 MHz < f ≤750 MHz) <-62 dBc, -76 dBc typ. (750 MHz < f ≤1.5 GHz) <-56 dBc, -70 dBc typ. (1.5 GHz < f ≤3 GHz) <-50 dBc, -64 dBc typ. (3 GHz < f ≤6 GHz)
	SSB Phase Noise	CW, 20 kHz offset, Phase Noise Opt.<200 kHz <-140 dBc/Hz nominal (100 MHz) <-131 dBc/Hz typ. (1 GHz) <-125 dBc/Hz typ. (2 GHz)
Dimensions and mass		177 mm(h) x 426 mm(w) x 390 mm(d) (Exclusive of surface projection) ≤13.7 kg (with Opt.032 or 034 or 036, excluding other options)
Remote Control		GPIB, 1000Base-T, USB-B

Options

Hardware Main frame	MG3740A	Analog Signal Generator
Hardware Option 1st RF　（Requires one option）	MG3740A-032	1stRF 100 kHz to 2.7 GHz
	MG3740A-034	1stRF 100 kHz to 4 GHz
	MG3740A-036	1stRF 100 kHz to 6GHz
Hardware Option 2nd RF　（optional）(1xx: Retrofit)	MG3740A-062/162	2ndRF 100 kHz to 2.7 GHz
	MG3740A-064/164	2ndRF 100 kHz to 4 GHz
	MG3740A-066/166	2ndRF 100 kHz to 6 GHz
Hardware Option Common　 (1xx: Retrofit)	MG3740A-001/101	Rubidium Reference Oscillator
	MG3740A-002/102	High Stability Reference Oscillator
	MG3740A-011/111	2ndary HDD
	MG3740A-017/117	Universal Input/Output
	MG3740A-020/120	Digital Modulation
	MG3740A-021/121	BER Test Function
	MG3740A-029	OS Upgrade to Windows 7
	MG3740A-313	Removable HDD
Hardware Option For 1st RF　 (1xx: Retrofit)	MG3740A-041/141	High Power Extension for 1stRF
	MG3740A-042/142	Low Power Extension for 1stRF
	MG3740A-043/143	Reverse Power Protection for 1stRF
	MG3740A-045/145	ARB Memory Upgrade 256 Msample for 1stRF*
	MG3740A-048/148	Combination of Baseband Signal for 1stRF*
	MG3740A-050/150	Additional Analog Modulation Input for 1stRF
Hardware Option For 2nd RF　 (1xx: Retrofit)	MG3740A-071/171	High Power Extension for 2ndRF
	MG3740A-072/172	Low Power Extension for 2ndRF
	MG3740A-073/173	Reverse Power Protection for 2ndRF
	MG3740A-075/175	ARB Memory Upgrade 256Msample for 2ndRF*
	MG3740A-078/178	Combination of Baseband Signal for 2ndRF*
	MG3740A-080/180	Additional Analog Modulation Input for 2ndRF
Software IQproducer*	MX370102A	TDMA IQproducer
Software IQproducer*	MX370107A	Fading IQproducer
Maintenance service	MG3740A-ES210	2 Years Extended Warranty Service
	MG3740A-ES310	3 Years Extended Warranty Service
	MG3740A-ES510	5 Years Extended Warranty Service

Data Sheet

Anritsu MG3740A Analog Signal Generator

011 805 5030 / 084 3797 031 - Phone orders
Monday-Friday, 08:00-17:00

Tags:

Anritsu MG3740A Analog Signal Generator Anritsu MG3740A Analog Signal Generator South Africa Anritsu MG3740A Signal Generator South Africa Anritsu MG3740A Signal Generator